Cerma Engine Treatment
cerma restores your old motor.
cerma extends life of you new motor.
Turn your worn out motor into a high performance cermic engine!
Cerma Extends the life of your New Motor!
Cerma Retores the life of your Old Motor!
Cerma STM-3 is a unique engine treatment that is added to the oil of a hot engine and over a short period of time it penetrates all the metal parts within with a hard glossy ceramic (Silicon Carbide – Sic) finish. It re-seals the engine from within restoring lost compression and any imbalance between the cylinders. Silicon Carbide is high strength, high hardness and has amazing thermal conductivity. It considerably reduces noise and vibration (harmonics) and puts an end to ‘dry starts’ – two of the leading causes of engine wear. Cerma is not an oil treatment; it’s an advanced metal treatment process.
It’s so effective, that after only 20 miles of driving you’ll notice how much smoother and quieter the engine is running
Cerma treatment is ‘sub-micron’ so it even penetrates the varnish build-up and adheres to all the engine parts, filling in all the micro pitting in the metal with a hard polished permanent layer of 2 to 6 microns. Cerma significantly reduces heat and friction and this will be apparent in improved fuel economy and engine performance. In tests, Cerma has proven capable of withstanding pressures in excess of 350,000 psi and lubricating at temperatures above 1900 F. The treatment continues improving for up to 90 days and one application is good for 200,000 miles.
Cerma Air Conditioner Treatment
Cerma Air treatment has been used and tested fully in Auto and Home applications with All refrigerants , including 410.
The largest Unit ever treated with Cerma Air is a 100 ton commercial rooftop unit
The testing for this product was conducted in the harsh environment of Phoenix, Az. and showed that Cerma Air improved the overall performance of all the units within the test, units showed that Cerma improved heat transfer, while reducing power usage,shorter cycling times.
Cerma has developed Cerma Air so that even a novice can apply the product using our applicator tool, as well as video's showing how to use the tools, and the proper dosage for your needs.
Things noticed a time of testing:
- Improved efficiency
- Shorter compressor cycle time to achieve desired temp setting
- Power savings
- Improved heat transfer
- Helps reduce internal moisture and acid buildup
- Corrected the need to change air dryer modules when saturated.
- Quieted down the compressor
- Revived hard start units to normal running
Cerma Automatic Transmission Treatment
Cerma has a broad range of products to address almost any friction situation and Moreco Energy LLC has the innovative products for maintaining and restoring that new vehicle look.
To purchase from Moreco Energy LLC or Cerma go to www.ebay.com "Moreco Energy LLC". For Cerma products only, go to www.cerma.info
To purchase from Moreco Energy LLC or Cerma go to www.ebay.com "Moreco Energy LLC". For Cerma products only, go to www.cerma.info